Your home page will display only articles and calendar events related to your fleet. You may change your preference anytime by changing your fleet preference in the upper right corner of the website.
Walter,
Thanks for creating this up-to-date Harbor 20 Tuning Guide!
You have captured a lot of important information and tips that will be useful to all.
Emile
Walter,
Excellent guide.
If I might ask a question…My jib “pumps” (i.e. the end of the Hoyt boom bounces up and down) when going up wind and the wind picks up a bit (say 10 -12 knots). Sheeting in the jib doesn’t help. Heading off does.
Any thoughts on what needs adjustment?
–Reuben
Can you tell me how you measure the mast rake on a Harbor 20? Do you run a tape measure to the top of the using the main halyard? Where do you take the other end of the tape measure – is it the outside edge of the transom?
What do you do if this measurement is 31′ 4″ – which is significant more then your recommended 30′ 4″
How do change the mast rake to 30’4″?
Can you tell me how to measure the mast rake of a Harbor 20? Do take a tape measure to the top of the mast using the main halyard? Where do measure to – is it the middle of the outside edge of the transom?
Walter,
Thanks for creating this up-to-date Harbor 20 Tuning Guide!
You have captured a lot of important information and tips that will be useful to all.
Emile
Walter,
Excellent guide.
If I might ask a question…My jib “pumps” (i.e. the end of the Hoyt boom bounces up and down) when going up wind and the wind picks up a bit (say 10 -12 knots). Sheeting in the jib doesn’t help. Heading off does.
Any thoughts on what needs adjustment?
–Reuben
Can you tell me how you measure the mast rake on a Harbor 20? Do you run a tape measure to the top of the using the main halyard? Where do you take the other end of the tape measure – is it the outside edge of the transom?
What do you do if this measurement is 31′ 4″ – which is significant more then your recommended 30′ 4″
How do change the mast rake to 30’4″?
Can you tell me how to measure the mast rake of a Harbor 20? Do take a tape measure to the top of the mast using the main halyard? Where do measure to – is it the middle of the outside edge of the transom?
What is best way to change the mast rake?